RB-GROUT

Epoxy anchoring grout

Description:

A three-component, repairing and filling polyamine Epoxy grout, with fast set, high durability and easy miscible properties. RB-GROUT has a fast curing agent and permeable to concrete Conforming to the requirements of ASTM C881, ASTM E1512 Standard and used for anchoring in concrete structures. This product is 100% solid and it is suitable for strengthen of substrate and where the concrete has no enough strength.

Advantages:

  • Fast set
  • Three-component in the packages fit together
  • High strength
  • Excellent adhesion to concrete and steel
  • High resistance against abrasion, scratch and dynamic loading
  • High tensile and bending strength
  • Self-compactible
  • Flowing mixture
  • Can be applied on horizontal and vertical surfaces
  • Resistant to water and chemical solution
  • Resistant to physical changes
  • Long-lasting durability

Main uses :

  • Installation and fixing of metal/ concrete/ stone parts
  • anchoring and anchor bolt

Physical properties

Color dark gray
Solids by volume 100%
Density 1.92±۰.۱ g/cm3
Mix ratio

(by weight)

A:B:C = 750: 450: 3800
Number of components 3
Adhesion to ceramic, stone, concrete More than  ۳ MPa
Water absorption Less than 0.1% by weight
Thermal resistance -30 to +100 ⁰C
Thermal expansion Coefficient 5*10mm/⁰C
Erosion resistance good
Linear expansion Coefficient

(ASTM D11680)

0.00040
Tensile strength (ASTM D638) 8700  psi
Hardness(shore D)

ASTM-D 2240

85±۵
Packaging Part A: 8 and 0.75 kg

Part B: 5 and 0.45 kg

Part C: 42.25 and 3.8kg

Processing properties

      @ ۲۵ºc /54% RH:

Gel time 20 min
Tack free 4 hours
Post cure 7 days

Application guide direction:

The surface must be dry and free from oil, grease, dust, rust or any impurity and loos area. First of all, mix part A and C with an electric mixer for 3 minute to ensure of perfect mixing. Afterward add par B to mixture and continue the mixing until a homogenous mixture is obtained. Please pour ready mixture into holes in less than 20 minute, and put the reinforcements into it and be sure about perfect contact between reinforcements and grout.

Important Advices

The reaction between components is exothermic, so in warm environments mixture components will set more quickly.

Do not open the packages till application time. Should be stored in a sealed container after opening. Before back to service, please check out and be sure about setting the grout. RB-GROUT components are flammable and don’t put them near the heat sources and flame. In cold environments these component will be more viscose, so please put these components in room temperature about 3 hours before usage

Storage :

12 months in unopened drums.  Keep away from extreme heat, freezing, and moisture.  The use of drum heaters is encouraged to reduce material viscosity at low temperatures.

 

Warning :

This product may cause allergic problems when contacts with skin or inhaled. Special clothes, masks and anti-chemicals gloves should be utilized during process. Protective creams and glosses should be used in order to protect skin and eyes, respectively.

share :
Facebook
LinkedIn
Telegram
WhatsApp