Repair mortar ,Surface Preparation:

One  component,  fiber  modified,  cement based,Any material which can prevent adhesion, such as oil,loose particles, etc. shall be removed from the surface.

polymer modified repair mortar. Surfaces should be wetted before applying. It should

Areas of Application: not be water on the surface.

•It can be used to repair concrete elements of all concrete structures, bridges, tunnels, etc. at vertical and horizontal applications.

•It can be used to repair concrete surfaces and repair edges of joint places.

Product Preparation:

ASOCRET-130 (water : powder = 1 : 8-9 by weight) shall be mixed with water. For a 25 kg pack approx. 2,75-3 liter water is adequate. The application consistency shall be “dry mortar”.


• It is suitable for construction strengthening applications.

• It is easy to prepare, only mix with water.

• Easy application.

• It is resistant to frost.

• Non-corrosive and non-toxic.

• Stops Carbon dioxide diffusion, therefore protects reinforcement bars.

• It has excellent physical properties.

Method of Application

ASOCRET-130 can be applied by a trowel.


Clean tools with water right after the application.

Health and Safety:

Please refer to the MSDS for details

Technical Data

Color: Grey

Specific Gravity: at 20ºC powder: 1,57 kg/l

Compression strength*:  ۱۷ N/mm² in 3 days 39 N/mm² in 7 days 55-70 N/mm² in 28 days

Flexural strength*:9 N/mm² in 7 days 12 N/mm² in 28 days

Adhesion strength*: 1,5-2,5 N/mm² (to concrete) * All strength values are measured at 23°C and 60% relative humidity.

Length change: <1 mm/m in 28 days

Pot life: at 20ºC, approx 1 hour

Application temperature: +5ºC – +30ºC

Application thickness: 5-30 mm


ASOCRET-130 is delivered in 25 kg sacks.


When stored in a dry condition in its unopened original package, 6 months.

share :