MIO Epoxy Polyamide Primer
Complies with AWWA-C 210
PFEP-2045 is protective primer or multipurpose underneath layer providing remarkable characteristics such as water resistance in partial and completely immersion condition without affecting on water’s taste and odor. It is suitable for protection of dry metal and concrete structures or where exposed to water. This product is able to dry perfectly and release all solvents and inhibits pigment migration to aqueous phase, have not any effect on color, taste and odor of water, thus it is specially formulated for potable water application.
- Remarkable resistance against water and chemicals
- Good corrosion resistance
- High adhesion to metal surfaces
- Excellent barrier properties against moisture and corrosive materials
- No effect on water taste and odor
- Main uses:
Interior and exterior faces of water storage tanks, water transfer structures and devices, and metal structures exposed to atmospheric condition.
- Physical properties:
|Color||Grey, purple gray|
|Mixing Ratio by weight||A/B =5/1|
|Mixing Ratio by volume||A/B=3/1|
|Solid content (A+B)||65±۵%|
|Density (A+B)||1.60±۰.۱ g/cm3|
|Recommended film thickness||60-80 µm|
|Theoretical coverage*||0.2-0.24 Kg/m2|
|Curing method||Solvents evaporation and chemical reaction|
* No material loss is consider in theoretical coverage calculation.
- Processing properties:
|Pot life||2 hours|
|Dust free time(ASTM D640)||3 hours|
|Post curing time(ASTM D640)||8 hours|
|Full curing time||7 days|
|Over coating interval||24 hours|
- Application Guide:
- Surface preparation:
All surfaces must be clean, dry and free from contaminants, grease, dust, rust, moisture and any loose particles. Metal substrates such as steel and iron are blasted up to SA2 grade. SA2.5 is recommended in aggressive conditions (e.g. water immersion). The painting process should be done exactly after the air blasting.
After surface preparation, the two parts of the paint should be thoroughly mixed using a suitable mixer until a homogenous solution is achieved. The paint can be thinned with T-950 thinner gradually while mixing.
PFEP-2045 is applied using ordinary air or airless spray and small surfaces can be repaired by brush.
Using suitable ventilation is necessary while paint application in close places.
All tools should be washed with T-950 thinner after the application.
12 months, in unopened package & protect from direct sun light at (5-40) ºc