PFEP-2010

DATA SHEET

PFEP-2010
Epoxy Polyamide Anti-Rust Description:
PFEP-2010 is a corrosion resistant shop-
primer based on Epoxy resin and
Polyamide hardener. This product is
specially formulated for steel substrates
and tanks to protect the structures and
pipelines against corrosive environments.
Advantages:
• Good resistance against chemicals, water and seawater
• Excellent adhesion
• Suitable hardness
• Corrosion protection of metal structures Main uses:
Metal structures exposed to corrosive atmosphere, metal piers, machineries, external surface of tanks and pipelines, ship body and decks, offshore platforms and structures, yachts and boats could be coated using this product.

Application Guide:
– Surface preparation:
All surfaces must be clean, dry and free from contaminants, grease, dust, rust, moisture and any loose particles. Metal substrates such as steel and iron are sand blasted up to SA2 grade. SA2 ½ is recommended in aggressive conditions (e.g. water immersion). The painting process should be done exactly after the air blast.
– Application:
After surface preparation, two parts of the paint should be thoroughly mixed using a suitable mixer until a homogenous solution is achieved. The paint can be thinned with T-950 thinner gradually while mixing.
PFEP-2010 is applied using ordinary air or airless spray and small surfaces can be repaired by bush.
Using suitable ventilation is necessary while paint application is done in close places.
All tools should be washed out with T-950 thinner.Storage:
24 months, in unopened package & protect from direct sun light.

PFEP-2010-EN.pdf

share :
Share on facebook
Facebook
Share on linkedin
LinkedIn
Share on telegram
Telegram
Share on whatsapp
WhatsApp