PFAC-7020 One-component Curbing Acrylic Coating

PFAC-7020 is a curbing coating based on thermoplastic acrylic resin which is cured in solvent evaporation method and reaction with air oxygen, providing a uniform surface. This paint is suitable for painting of street/road curbs and other concrete/cement structures due to high compatible with concrete/cement surfaces and asphalt. This product is resistant against sunlight and different environmental conditions and climate changes, wind and rain.

• High adhesion to concrete / cement / asphalt surfaces and similar surfaces
• Fast drying
• Good light reflection
• High stability against sunlight
• Good abrasion resistance
• Suitable chemical resistance

• painting of concrete structures exposed to sunlight and Shadow

Application guide

Surface preparation:
All surfaces must be clean, dry and free from contaminants, grease and moisture.
Ambient conditions:
Ambient temperature should be in range +5°C to +50°C during application.
The paint is diluted with adding T-550 thinner gradually while mixing until homogenous solution is obtained.
PFAC-7012 is applied using air spray, brush or roller. All tools should be washed with T-550 thinner after the application. Storage: 6 months, in unopened package &protect from direct sunlight and heat at (+5 to +30) ºC

share :