One-component Acrylic Coating
Description:
PFAC-7012 is a coating based on thermoplastic acrylic resin which is dried in solvent evaporation method and reaction with air oxygen, providing a uniform surface. This paint due to high compatible with concrete/cement surfaces and asphalt, it is suitable for painting of curbs and also façade. This product is resistant against sunlight and different environmental conditions and high compatibility with climate changes.
Advantages:
- High adhesion
- Fast curing
- Good light reflection
- High stability against sunlight
- Good abrasion resistance
Main uses:
- Facade coating
- Painting of curbs
- Painting of urban furniture (benches, chairs…)
- Topcoat for epoxy systems for UV exposure
Physical properties:
| Color | White – yellow – green- Any color ordered |
| Gloss | Matt-Semi gloss |
| Components | 1 |
| Solid content | 75±۵ % |
| Density | 1.45±۰.۱ g/cm3 |
| Recommended dry film thickness | 300 µm |
| Theoretical coverage | 0.12-016 kg/m2 |
| Curing method | Solvents evaporation |
| Thinner | T-550 |
| Packaging | 200 kg, 20 Kg |
Processing properties:
| Tack free time | 30 min (thikness 60µm) |
| Post curing time | 2 hours |
| Full curing time | 24 hours |
| Over coating interval | 4 hours |
Application Guide:
Surface preparation:
All surfaces must be clean, dry and free from contaminants, grease and moisture.
Ambient conditions:
Ambient temperature should be in range +5°C to +50°C during application.
Application:
The paint is diluted with adding T-550 thinner gradually while mixing until homogenous solution is obtained.
PFAC-7012 is applied using air spray, brush or traffic marking machines.
All tools should be washed with T-550 thinner after the application.
Storage:
12 months, in unopened package &protect from direct sunlight and heat at +5 ºC to +40 ºC
