Epoxy flooring
Description:
It’s based on epoxy resin and polyamine hardener. It has excel and adhesion, very good water resistance , chemical resistance and can be applied as seamless flooring on concrete or steel floors.
Advantages:
- Very good adhesion to steel & concrete surfaces
- High resistance against water , chemicals , oil , acids , alkalis , gasoline …
- Protect the environmental against contamination , concrete dust….
- Good resistance against thermal tolerance
- Good abrasion and compression resistance
- High strength
Main uses:
- Concrete floorings in workshops , ware houses , food processing factories , chemical , medical ,electrical , weaving , military , industries
- Flooring in hospitals , factories , airports , industrial areas , . . .
Physical properties:
| Color | available up on request |
| Gloss | Glossy |
| Components | 2 |
| Mixing Ratio by weight | A/B=5.5/1 |
| Mixing Ratio by volume | A/B=3/1 |
| Solid content | 100% |
| Density (A+B) | 1.70±۰.۱ gr/cm3 |
| D.F.T | 1.5-3 mm |
| Consumption | 3.4 Kg/ m2/
(2 mm thickness) |
| Over coating interval | 8 hrs @ 25°c |
| Curing method | Chemical reaction |
| Shelf life | 12 months
In closed containers , not exposed to direct sun light in 5-30ºc |
| Packaging | A:16.5 Kg
B: 3 Kg |
Processing properties:
| Pot life | 20 min @ 40°c
50 min @ 25°c |
| Dust free time(@25̊c) | 2-4 hrs |
| Post curing time(@25̊c) | 12 hrs |
| Full curing time | 7 days |
Application Guide Direction:
surface preparation:
Concrete Substrate
The surface should be hard. Use scratcher or grinder to get better profiles and better adhesion.
Then remove dusts with vacuum or blowing. Apply concrete primer PFEP-2168. After primers tack free time fill the pours with Epoxy mastic PFEP-2235.
Steel surface
Remove all dirt , dusts , oils , grease , chloride salts , sulfate salts , loose particles , . . . by washing with solvents , detergents , . . .
Do sand blasting for removing rust and getting better profile. Remove all irregularities with hammer, grinder,…
Ambient condition:
Ambient temperature while application should be between 10- 50ºc
Application:
Mix 2components with agitator until a homogenous liquid achieves. Pour the mined compound on the floor and spread it with trowel or roller.
After application clean the tools with Epoxy thinner T-950.
Storage:
12 months in closed containers, not exposed to direct sun light in 5-30ºc
