JONOOB PROTECTIVE COATINGS GROUP

POLYGUM : We offer the best choices for anti-corrosion & protective coating systems for pipelines &metal & concrete structures, Joint sealants, industrial paints & floorings, Waterproofing and concrete repairing systems, Concrete Admixtures, Marine Coatings, …
Industrial Paint

Industrial Paint

products
Pipline Coatings

Pipline Coatings

products
سیستم های نوارپیچی ضد خوردگی

سیستم های نوارپیچی ضد خوردگی

 products 

Waterproofing

Waterproofing

 products
Admixture

Admixture

products
Repairing

Repairing

products

 

Joint Sealant

Joint Sealant

products
Flooring

Flooring

products
مصالح کاشیکاری

مصالح کاشیکاری

products

 

Latest Project

  • BETOCRETE-E100
    BETOCRETE-E100 Accelerating and water-reducing concrete admixture
  • PFA-1010
    PFA-1010 PFA-1009 is a corrosion resistant primer based on Alkyd resin and red iron oxide pigment which provides the corrosion protection of metal substrates in high humilities.
  • PFEP-2012
    PFEP-2012 PFEP-2012 is a high performance corrosion resistant primer based on Epoxy resin and Polyamide hardener providing general characteristics of Epoxy coatings such as excellent adhesion. A 100- micron layer of this product protects metal structures in manufacture to installation interval. If over coated by proper topcoat (Epoxy, Coal Tar Epoxy, Acrylic, Alkyd or Polyurethane), it provides a resistant system for anti-corrosion targets.
  • Polyfloor PU
    Polyfloor PU It’s a two-component-product based on polyurethane ,which can be used as the seamless industrial flooring on concrete floors in heavy duty industries.

  • ASOCRET-130
    ASOCRET-130 Repair mortar ,Surface Preparation: One component, fiber modified, cement based,Any material which can prevent adhesion, such as oil,loose particles, etc. shall be removed from the surface.
  • PFEP-2126
    PFEP-2126 PFEP-2126 is a coating based on coal tar and two-component solvent-free high-build epoxy polyamide resin which adheres well to cement, plaster, wood, asbestos, concrete and metals. It provides excellent protective characteristics after chemical curing bit is not proper for potable water exposing or when benzene, toluene or xylene is existed.
  • AQUAFIN-P4
    AQUAFIN-P4 Elastic polyurethane injection resin AQUAFIN-P4 is a solvent free, low viscosity, two component polyurethane resin. AQUAFIN-P4 is slow reacting and hardens to a non-expansive, flexible, pore-free material, which lightly foams on contact with water. AQUAFIN-P4 bonds to dry as well as damp substrates and has exceptional adhesion and tear resistance. AQUAFIN-P4 has a low glass transition temperature.
  • INDUCRET-BIS-1/6
    INDUCRET-BIS-1/6 Cementitious fine smoothing mortar for voids from 1 – 6 mm depth, maximum grain: 0.5 mm